Built in 1809 the Oneida is a 16 gun Brig. This 1/4 scale plank on frame kit has all the hull timbering laser cut. With just a few basic hand tools you can create a beautifully crafted classic plank on frame ship model. Included are a set of computer drafted, color coded plans, laser cut gun carriages and casted carronades, milled stock for deck clamps, wales and bulkward planking. The hull size is 24 x 6 x 6.
We have provided on-line step-by-step instructions with photos on how to assemble the pieces into a finished model that you will be proud of for generations! You can start with part 1 and move through the steps sequentially, or you can skip around through the following menu:
Part 1 - Plans
Part 2 - Laser Cutting
Part 3 - Building
the Frames
Part 4 - Setting up the Hull
Part 5 - Building the Hull
Part 6 - Sanding the Hull
Part 7 - Building the Keelson
Part 8 - Building the Stern
Part 9 - Building the Stern (cont'd)
Part 10 - Building the Deck
Part 11 - Building the Bulwarks
Part 12 - Building the Capstan Base
Part 13 - Building the Counter Timbers
Part 14 - Building the Deck Clamps
Part 15 - Deck Construction
1
Part 16 - Deck Construction 2
Part 17 - Deck Construction 3
Part 18 - Deck Constuction 4
Part 19 -
Building the Deck Knees
Part 20 - Finishing the Deck
Part 21 -
Building the Fore Castle Deck
Part 22 - Building the Hatch Comings
Part 23 - Building the Port Sills
Part 24 - Builing the Sweep Ports
Part 25 - Building the Skylights
Part 26 - Building the Transom Rails
Part 27 - The Main Wales
Part 28 - Building the Waterways
![]() |
![]() |
![]() |
Home | Wood | Ship Kits | Articles | Cannons | Shop On-line | About Us | Videos
![]() |
---|
6908 Stadium Drive • Brecksville, OH 44141 •
440.526.2173
mrs22wood@aol.com • bodyplan@aol.com